You are left with a stack of undesirable green wood after chopping off your lumber for the next woodworking. Or you purchased a wood that is full of moisture that needs to be dried up immediately. Whichever the case may be, the bottom line is you are not happy with the wood wetness, and you can’t work with wet woods.
What would you do? How will you make the woods to be dry? These are the questions that wander in your mind. wander no more because this article will help you know the necessary things to remove the moisture content from the woods to start your woodworking successfully.
How To Dry Wood For Woodworking
Apart from the standard air-drying process, we will see some speed drying tips when we want to dry our wood for woodworking. And will also include some techniques to reduce the moisture of the wood.
But with all this, keep in mind that it might not be the fastest drying method out, but it is never slow. Doing this the right way will take as long as a couple of weeks or months for your woods to dry the way you want it for any of your woodworking projects.
There is a step-by-step method to follow through. Let’s get started!
Step by Step Process-:
A stock wood moisture meter is the first thing you should purchase. This wood moisture meter can be seen as a bit of a tool with outstanding works. It is used to determine the wood moisture content. It is of two metal probes that are used to touch against the wood, and with immediate effect, you will know the moisture content of the wood.
For any woodworking project, 7% is the highest acceptable moisture content. But in the situation where wood has a higher moisture content, you should do your best to get it dry.
So, having come to know that you have to dry your woods. Don’t put them on a Bare floor; just lay a row of stickers on the ground. Layout the pieces of wood evenly with 16inches Spaces in between the stickers.
The boards meant for drying should be stacked on the stickers from the first layer to the last layer. The woods should be laid in an orderly manner on the stickers that are perpendicular. And always try to leave an inch of space in between the pieces of wood. The airflow will be increased when you follow this method, and you know what that means; the more airflow, the quicker drying of woods.
After making the first layer, you have to make another layer of a sticker. You cannot stack the wooden pieces you are drying directly on top of each other; there will not be airflow. So you need to alternate layers before stacking another wood. So the arranging order is a sticker, wood, sticker, wood, continuously.
You need to keep in mind an important aspect: you need to weigh the woods daad after stacking, and if kept outdoor, make sure you protect it from rain.
Do all you can to get big plywood that is very big in covering the whole top of the stack. Weigh your woods down sufficiently to avoid it from getting warp when you are drying it because it will not be suitable for your woodworking. Do all these the right way and follow the steps then your woods will dry quickly.